INTRODUCTION
The Design Explorer module is a crucial tool in managing the PCB Design workflow. It has several important uses:
- Analysis of the Schematic.
- Cross Probing.
- Floorplanning and Placement on the PCB
- Variant management
- Property Editing (e.g. Change all 10k resistor footprints).
![]()
Design Explorer icon
The Design Explorer can show you information about the schematic in two ways:
Partslist View
This view provides a physical representation of the schematic, showing you sheets, hierarchies, components and component pins. You can navigate both across a design (if, for example you have a multi-sheet design with more than one root sheet) and down a design (moving through a design hierarchy or drilling down from a component to look at a listing of the component pins).
Netlist View
This view provides a representation of the connectivity of the schematic, showing you a listing of all the nets on the schematic and all the pins connected to the selected net.
See Also: